Charging your Rhino battery is really easy.
Step-by-step battery charging guide
-
First, you'll need to remove it from the bike. To remove your battery:
-
Insert your battery key and turn to the left in the key hole so it is an "unlocked position"
-
Find the handle underneath the battery pack
-
Gently pull the battery out using the handle while the key is in the "unlocked position"
-
- Find a safe, dry area away from direct sunlight, dirt, or debris to charge the battery (preferably inside)
- Plug the battery into the charger (the charging plug is covered by a protective cover as per the picture below)
- Make sure the power switch on the battery is turned on
- Plug the charger into an appropriate power outlet, ensuring the charging cord does not create a trip hazard. You will see one or more of the bars on the battery light up in red to show the battery is charging
- Charge for the appropriate amount of time. The battery is fully charged when all 4 bars on the battery are green. Charging a battery from empty to fully charged, typically takes 3-7 hours. Never charge the battery for more than 24 hours at a time
- Once fully charged, unplug the charger from the power outlet, then unplug the battery from the charger
- Gently reinsert the battery into your bike. It will lock automatically
For tips on how to store a battery for an extended period of time, please see our article: How to store your Rhino battery
Comments
0 comments
Please sign in to leave a comment.